Stable Metallic Enrichment in Conductive Filaments in TaOx‐Based Resistive Switches Arising from Competing Diffusive Fluxes
Abstract
Oxide‐based resistive‐switching devices hold promise for solid‐state memory technology. Information encoding is accomplished by electrically switching the device between two nonvolatile states with low and high resistance states (LRS/HRS). It is generally accepted that the change between these states is due to the motion of oxygen vacancies forming a continuous (LRS) or gapped (HRS) filament between the electrodes. Direct assessments of filaments are rare due to their small size and the difficulty of locating the filament. Electron microscopy experiments reveal the filament structure and chemistry in TaO2.0 ± 0.2‐based 150 × 150 nm2 devices with cross‐sectional geometry after forming with power dissipation lower than 1 mW. The filaments appear to be roughly hourglass‐shaped with a diameter of less than 10 nm and are composed of Ta‐rich and O‐poor mostly amorphous material with local compositions as Ta‐rich as TaO0.4. The as‐formed HRS has a gap up to 10 nm wide located next to the anode and composed of nearly stoichiometric TaO2.5. The tantalum and oxygen distribution is consistent with filaments formed by the motion of both Ta and O driven by temperature gradients (Soret effect) and an electric field. This interpretation points towards a new compact model of resistive‐switching devices.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Apr 29, 2019
- Source ID
- 10.1002/aelm.201800954
Entities
People
- Dasheng Li
- David A Cullen
- James Bain
- Jonathan M. Goodwill
- Jonathan Poplawsky
- Karren L. More
- Marek Skowronski
- Yuanzhi Ma
Organizations
- Carnegie Mellon University
- National Science Foundation
- Oak Ridge National Laboratory
- Office of Naval Research