A Hybrid Process for Printing Pure and High Conductivity Nanocrystalline Copper and Nickel on Flexible Polymeric Substrates
Abstract
Printing functional devices on flexible substrates requires printing of high conductivity metallic patterns. To prevent deformation and damage of the polymeric substrate, the processing (printing) and post-processing (annealing) temperature of the metal patterns must be lower than the glass transition temperature of the substrate. Here, a hybrid process including deposition of a sacrificial blanket thin film, followed by room environment nozzle-based electrodeposition, and subsequent etching of the blanket film is demonstrated to print pure and nanocrystalline metallic (Ni and Cu) patterns on flexible substrates (PI and PET). Microscopy and spectroscopy showed that the printed metal is nanocrystalline, solid with no porosity and with low impurities. Electrical resistivity close to the bulk (~2-time) was obtained without any thermal annealing. Mechanical characterization confirmed excellent cyclic strength of the deposited metal, with limited degradation under high cyclic flexure. Several devices including radio frequency identification (RFID) tag, heater, strain gauge, and temperature sensor are demonstrated.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Dec 13, 2019
- Source ID
- 10.1038/s41598-019-55640-7
Entities
People
- Ali Behroozfar
- Majid Minary-Jolandan
- Md Emran Hossain Bhuiyan
- S.R. Morsali
- Salvador Moreno
- Soheil Daryadel
Organizations
- National Aeronautics and Space Administration
- National Science Foundation
- Office of Naval Research