Thermal imaging of buried heterostructure quantum cascade lasers (QCLs) and QCL arrays using CCD-based thermoreflectance microscopy
Abstract
Thermal profiles of a single-element quantum cascade laser (QCL) and a five-element QCL array at different bias currents, under quasi-continuous-wave (QCW) conditions, are obtained using the charge-coupled device (CCD)-based thermoreflectance imaging technique. Peak temperature changes of 55 K and 105 K are measured on the single-element QCL (operating at 1.2 A) and the central element of the QCL array (operating at 4.2 A), respectively. The average facet temperature of the single QCL device shows a linear relationship with the dissipated power, indicating an effective thermal resistance of Rth = 3.0 ± 0.2 K/W (7%) for the device. The thermal transient behavior of the single QCL device, in response to a 35 μs-wide heating pulse, is also measured. From the transient curve, an effective thermal time constant of τth = 9.5 ± 0.4 μs (4%) is obtained. Experimental results are compared to the results obtained from heat-transfer models for both the single-element and array devices. Thermal profiles show a thermal lensing effect at the facet of the single-element QCL. In the array device, a more pronounced heating is observed at the center of the device while the temperature gradually decreases away from the central element.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Jan 17, 2019
- Source ID
- 10.1063/1.5065507
Entities
People
- B. Knipfer
- C. Boyle
- C. Sigler
- D. Botez
- D. Lindberg
- Jeremy D. Kirch
- L. J. Mawst
- M. Farzaneh
- N. Becher
- T. Earles
Organizations
- Air Force Research Laboratory
- Army Research Office
- University of Wisconsin–Madison
- University of Wisconsin–Stevens Point