Tailoring particle alignment and grain orientation during tape casting and templated grain growth
Abstract
The quality of crystallographic alignment in textured ceramics produced by tape casting and templated grain growth (TGG) has been little studied despite its demonstrated impact on magnetic, piezoelectric, and optical properties. Physical and crystallographic alignment of anisotropic template particles is shown to be directly linked to the casting rate, gap height, and casting viscosity during tape casting. These parameters are shown to affect the shape and magnitude of the shear rate profile under the doctor blade during casting which in turn causes a gradient in the torque acting on anisotropic particles. The magnitude of the torque, the time the slurry is exposed to torque during casting, and the ratio of casting height to template diameter are demonstrated to enable the particle alignment process to be tailored to produce well‐aligned template particles. Crystallographic alignment of the textured ceramic was quantified by grain misalignment angle (full width at half maximum, FWHM) and degree of orientation (r) and is directly correlated with the degree of torque during casting. High‐quality alignment (FWHM = 4.5°; r = 0.13) was demonstrated in the model TGG system consisting of submicrometer alumina and 5 vol% 11 μm diameter template platelet particles.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Oct 30, 2018
- Source ID
- 10.1111/jace.16144
Entities
People
- Anna‐katharina Hofer
- Elizabeth R. Kupp
- Gary L. Messing
- Mark D. Vaudin
- Rebecca L. Walton
- Richard J. Meyer
Organizations
- Montanuniversität Leoben
- National Institute of Standards and Technology
- Office of Naval Research
- Pennsylvania State University