Flash sintering of yttria‐stabilized zirconia powders coated with nanoscale films of alumina by atomic layer deposition
Abstract
The addition of small quantities of aluminum oxide (Al2O3) to 8 mol% yttria‐stabilized zirconia (8YSZ) benefits conventional sintering by acting as a sintering aid and altering grain growth behavior. However, it is uncertain if these benefits observed during conventional sintering extend to flash sintering. In this work, nanoscale films of Al2O3 are deposited on 8YSZ powders by particle atomic layer deposition (ALD). The ALD‐coated powders were flash sintered using voltage‐to‐current control and current rate experiments. The sintering behavior, microstructural evolution, and ionic conductivities were characterized. The addition of Al2O3 films changed the conductivity of the starting powder, effectively moving the flash onset temperature. The grain size of the samples flashed with current rate experiments was ~65% smaller than that of conventionally sintered samples. Measurement of grain size and estimates of sample density as a function of temperature during flash sintering showed that small quantities of Al2O3 can enhance grain growth and sintering of 8YSZ. This suggests that Al2O3 dissolves into the 8YSZ grain boundaries during flash sintering to form complexions that enhance the diffusion of species controlling these processes.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Feb 11, 2021
- Source ID
- 10.1111/jace.17684
Entities
People
- Alan W Weimer
- Bola Yoon
- Christopher J. Gump
- Rebecca J. O’Toole
- Rishi Raj
Organizations
- Army Research Office
- Division of Civil, Mechanical & Manufacturing Innovation
- University of Colorado
- University of Colorado Boulder