The influence of alkaline treatment on the mechanical performance of geopolymer composites reinforced with Brazilian malva and curaua fibers
Abstract
Lignocellulosic fibers obtained from the curaua (Ananas erectifolius) and malva (Malva sylvestris) plants in Brazil can be used as suitable reinforcements for geopolymers (GPs) owing to their high strength, ready regional availability, and low cost. In this work, the tensile and flexural strengths of untreated and NaOH alkali‐treated curaua and malva fiber‐reinforced GP composites were measured according to ASTM standards. Curaua reinforced GP composites had an average tensile strength of 25.7 (±) 7.1 MPa and flexural strength of 18.9 (±) 4.72 MPa. Malva GP composites withstood 19.18 (±) 9.0 MPa in tension and 31.5 (±) 7.6 MPa in flexure. Additionally, pullout tests were performed to investigate the debonding mechanisms for both fibers, with and without alkaline treatment, finding increases in chemical bonding for the treated samples due to roughness enhancements through fiber surface modifications with alkali treatment. Thermogravimetric analysis and X‐ray diffraction were used to characterize the physical fiber modifications after alkali treatment, evidencing lignin and hemicellulose removals. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy were used to further examine the fiber–matrix interaction, with proofs of interfacial tailoring.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Sep 08, 2022
- Source ID
- 10.1111/jace.18716
Entities
People
- Ana Carolina Constâncio Trindade
- Kaushik Sankar
- Waltraud M. Kriven
Organizations
- Air Force Office of Scientific Research
- University of Illinois Urbana–Champaign