First Step Toward the Codesign of Planing Craft and Active Control Systems
Abstract
This paper takes a novel approach to the design of planing craft with active control systems (ACS) by codesigning the longitudinal center of gravity (lcg) and ACS, and compares its performance with a vessel where the lcg and ACS are designed sequentially (traditional approach). The vessels investigated are prismatic in shape. The ACS are modeled as forces on the vessel. The ACS controller is a linear quadratic regulator (LQR) designed using a reduced-order model of the vessel. In the design, only the calm-water drag is optimized. The simulated codesigned vessel had 10% lower calm water and mean seaway drag than the sequentially designed vessel. However, the codesigned vessel's seakeeping was poorer—vertical acceleration doses 25% higher. Results indicate that the traditional sequential design approach does not fully exploit the synergy between a planing craft and its ACS; as a first step, the stability constraints should be relaxed in the design exploration, and the ACS should be considered early in the design stage.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Nov 29, 2016
- Source ID
- 10.1115/1.4034761
Entities
People
- Armin W. Troesch
- Esteban L. Castro-feliciano
- Jing Sun
Organizations
- Office of Naval Research
- University of Michigan