On-Design Component-Level Multiple-Objective Optimization of a Small-Scale Cavity-Stabilized Combustor
Abstract
This work presents an on-design component-level multiple-objective optimization of a small-scaled uncooled cavity-stabilized combustor. Optimization is performed at the maximum power condition of the engine thermodynamic cycle. The computational fluid dynamics simulations are managed by a supervised machine learning algorithm to divide a continuous and deterministic design space into nondominated Pareto frontier and dominated design points. Steady, compressible three-dimensional simulations are performed using a multiphase realizable k–ε RANS and nonadiabatic flamelet/progress variable combustion model. Conjugate heat transfer through the combustor liner is also considered. There are fifteen geometrical input parameters and four objective functions viz., maximization of combustion efficiency, and minimization of total pressure losses, pattern factor, and critical liner area factor. The baseline combustor design is based on engineering guidelines developed over the past two decades. The small-scale baseline design performs remarkably well. Direct optimization calculations are performed on this baseline design. In terms of Pareto optimality, the baseline design remains in the Pareto frontier throughout the optimization. However, the optimization calculations show improvement from an initial design point population to later iteration design points. The optimization calculations report other nondominated designs in the Pareto frontier. The Euclidean distance from design points to the Utopic point is used to select a “best” and “worst” design point for future fabrication and experimentation. The methodology to perform computational fluid dynamics optimization calculations of a small-scale uncooled combustor is expected to be useful for guiding the design and development of future gas turbine combustors.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Jan 03, 2022
- Source ID
- 10.1115/1.4051966
Entities
People
- Alejandro M. Briones
- Brent A Rankin
- Timothy J. Erdmann
Organizations
- Air Force Research Laboratory
- University of Dayton Research Institute