Inspection of plate weldments through an interposed layer of viscoelastic material using an elastic-electromagnetic scanning method
Abstract
In this article, an elastic-microwave based non-destructive evaluation method is presented to inspect for cracks in weldments and thinning of coated steel plates. The approach uses a microwave interferometer operating at 94 GHz to record the total surface displacement of a coated steel plated as it is driven by an incident elastic field. These spatiotemporal data coupled with wavefield processing algorithms provide powerful detection and localization capabilities. From these wavefield data sets, a plate thickness mapping capability has been demonstrated that can detect thickness changes on the order of 0.79 mm (1/32 in.). It is also shown that a topological energy analysis of the wavefield data can detect and locate small flaws on the order of 5–10 mm (0.19–0.40 in.) in the welded joint. Note, all of these results are obtained through a 50.8 mm (2 in.) thick viscoelastic coating without disturbing the coating or the coating bond. At present the algorithm cannot resolve individual flaws within a grid space, just their cumulative effect. Even with the current limitations, this detection approach appears to be a promising alternative to traditional phased array imaging methods where the coating layer must be removed prior to inspection.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Jun 01, 2019
- Source ID
- 10.1121/1.5111136
Entities
People
- David Obenauf
- Karl A. Fisher
- Owen Mays
- Peter Haugen
Organizations
- Lawrence Livermore National Laboratory
- Office of Naval Research