Electro-mechanical studies of multi-functional glass fiber/epoxy reinforced composites
Abstract
An experimental study is performed to investigate the electro-mechanical response of three-dimensionally conductive multi-functional glass fiber/epoxy laminated composites under quasi-static tensile loading. To generate a three-dimensional conductive network within the composites, multi-wall carbon nanotubes are embedded within the epoxy matrix and carbon fibers are reinforced between the glass fiber laminates using an electro-flocking technique. A combination of shear mixing and ultrasonication is employed to disperse carbon nanotubes inside the epoxy matrix. A vacuum infusion process is used to fabricate the laminated composites of two different carbon fiber lengths (150 µm and 350 µm) and four different carbon fiber densities (500, 1000, 1500, 2000 fibers/mm2). A four circumferential probe technique is employed to measure the in-situ electrical resistance of composites under tensile load. Although composites of both carbon fiber lengths showed significant decrease of sheet resistance under no mechanical load conditions, composites of 350 µm long carbon fibers showed the lowest resistivity of 10 Ω/sq. Unlike the resistance values, composites of 350 µm carbon fibers showed a significant decrease in Young’s modulus compared to 150 µm counterparts. For the electro-mechanical response, composites containing carbon fibers of 150 µm long demonstrated a maximum value of percentage change in resistance. These results were then compared to both 350 µm and no added carbon fibers under quasi-static tensile loading.
Document Details
- Document Type
- Pub Defense Publication
- Publication Date
- Feb 21, 2019
- Source ID
- 10.1177/0731684419832796
Entities
People
- Asha Hall
- Jacob O’donnell
- Latha Nataraj
- Michael Coatney
- Mulugeta Haile
- Vijaya Chalivendra
- Yong Kim
Organizations
- United States Army Research Laboratory
- University of Massachusetts Dartmouth