X-20 HIGH TEMPERATURE SIDE WINDOW TEST EVALUATION
Abstract
The purpose of this program was to experimentally verify the X-20A side window assembly and provide experience for improved window design. The objective was to verify the structural integrity of an X-20A high temperature window design in the X-20A flight environment and provide test data to evaluate the design analysis and development procedures utilized. The window was subjected to a low-level boost vibration environment, outward acting (partial vacuum) limit boost pressure of 7.7 psia, and a simulated reentry heating time- temperature history. The window failed during the re-entry temperature cycle. The primary cause of failure was the high temperature gradient through the depth of the window frame of approximately 850 F which exceeded by a factor of 2 the ultimate design value. The extreme thermal gradient caused thermal curvature of the window frame which induced glass curvature in excess of allowable. Measured temperature and deflections are presented and compared with analytical values. A thermal analysis is presented and compared with test values. Deficiencies of the X-20 window design as determined from the test program are pointed out and suggested methods of improvement are given.
Document Details
- Document Type
- Technical Report
- Publication Date
- Nov 01, 1965
- Accession Number
- AD0477758
Entities
People
- John C. Mcginnis
Organizations
- Boeing