A GENERALIZED EXPERIMENTAL STUDY OF INLET TEMPERATURE RISE OF JET V/STOL AIRCRAFT IN GROUND EFFECT,

Abstract

Reduction in exhaust pressure ratio (weight flow) had very little effect on the inlet temperature rise. Reduction in exhaust gas temperature lowered the inlet air temperature significantly. Large changes in wing area and variations in lift engine inlet/exhaust arrangements caused no consistent or significant trends in inlet temperature rise characteristics. In dual lift engine configurations the forward inlet experiences somewhat higher temperatures than the aft inlet. Changes in wing planform shape and height on the fuselage had no appreciable influence on lift engine inlet temperature rise. Forward facing side inlets experience large rises in air temperature for any exhaust nozzle arrangement. Typical aircraft components such as flaps, slats, inlet/exhaust doors, and landing gear have very little influence on inlet temperature rise. Deflecting the exhaust gases rearward, as in the case of STOL operation, reduced inlet temperature rise significantly at relatively low forward speeds. Moderate headwinds cause a rapid increase in inlet air temperature up to 15 to 20 fps after which the temperatures reduce somewhat. The magnitude of temperature rise is dependent on the inlet/exhaust arrangement. The motion during vertical ascent and descent apparently alters the pattern of hot gas recirculation and reduces the net inlet temperature rise considerably.

Document Details

Document Type
Technical Report
Publication Date
Apr 05, 1966
Accession Number
AD0641610

Entities

People

  • P. E. Ryan
  • Robert F. Speth

Organizations

  • Bell Aircraft Corporation

Tags

Communities of Interest

  • Air Platforms

DTIC Thesaurus Topics

  • Air Temperature
  • Aircraft Equipment
  • Aircrafts
  • Airframes
  • Doors
  • Exhaust Gases
  • Exhaust Nozzles
  • Fuselages
  • Gases
  • Ground Effect
  • Hot Gases
  • Landing Gear
  • Planform
  • Shape
  • Short Takeoff Aircraft

Readers

  • Aerodynamics/Aeronautics.
  • Combustion and Flow Dynamics.
  • Thermal Physics or Thermal Science.