Sealed Lithium Inorganic Electrolyte Cell.

Abstract

Work was continued during the second quarter on investigating the operating characteristics of lithium/thionly chloride cells, as well as on the evaluation of cell compounds to be used in building D-size cells. The pressure build-up in sealed cells on discharge was investigated over a wide range of discharge rates. It was established that no gas is generated in the cell at the discharge rate of 1.5 mA/sq cm of electrode. A steady, low-rate gassing at higher rates of discharge is related to the total capacity obtained, and independent of discharge rate in a fairly wide range of current densities, as long as the voltage of the cell remains above approximately 1.5V. A different type of gas is generated in the cell at the end of discharge and at a much higher rate. This gas redesolves in the electrolyte soon after the discharge is terminated, leaving behind only the noncondensible gas formed at discharge at a higher operating voltage. Three kinds of battery cathodes were evaluated during this period. The design calculations were made, predicting the maximum capacity and the rate capability of D-size cells made with these cathodes.

Document Details

Document Type
Technical Report
Publication Date
Nov 01, 1974
Accession Number
ADA001756

Entities

People

  • A. Lombardi
  • N. Marincic

Tags

DTIC Thesaurus Topics

  • Chemical Compounds
  • Chlorides
  • Chlorine Compounds
  • Current Density
  • Electrical Equipment
  • Electrodes
  • Electrolytes
  • Test And Evaluation

Readers

  • Battery Technology and Engineering
  • Combustion and Flow Dynamics.
  • Mathematics or Statistics