Blockage of Flame Control Devices: Design and Maintenance Criteria
Abstract
A study was conducted of the blockage of flame control devices and the effect of flow constriction on the pressure-releif function of the venting system. It was found that the open area must be almost completely blocked before the tank pressure would rise significantly (e.g., 93% blockage to produce 3 psig at 30 ft/sec normal venting speed). The available evidence suggests three blockage mechanisms occur with significant frequency: (a) plugging by liquid cargo due to condensation or overfill; (b) polymerization of monomer-type cargoes; and (c) corrosion by cargo vapor or moist air. Seven cargoes were found to present a significant polymerization hazard (acrylate and methacrylate esters, formaldehyde, acrylonitrile, butadiene, styrene, vinylidene chloride, and vinyl acetate) the characteristics of these materials were tabulated along with recommended use of inerting or inhibitors. The corrosion potential of 50 cargoes used with each of 20 metals was evaluated; out of 1000 combinations at least 130 were found unsuitable, with magnesium-and copper-based metals accounting for 90% of the unsuitable cases.
Document Details
- Document Type
- Technical Report
- Publication Date
- Aug 01, 1975
- Accession Number
- ADA015143
Entities
People
- P. G. Gott
- R. P. Wilson Jr.
Organizations
- Arthur D. Little