Effects of Flowing Natural Seawater and Electrochemical Potential on Fatigue-Crack Growth in Several High-Strength Marine Alloys
Abstract
Fatigue crack propagation was studied on samples of four high-strength marine alloys to determine the sensitivity of fatigue-crack growth rates to seawater and electrochemical potential. The materials studied included HY-130 steel, 17-4 PH steel in several combinations of melt processing and temper, Ti-6Al-2Cb01Ta-0.8Mo, and 5456-H116 aluminum. Fatigue testing was conducted at low cyclic frequency, and the fatigue data are presented in terms of fatigue-crack growth rate (da/dN) versus crack-tip stress-intensity factor range (Delta K). Test specimens were exposed to fresh flowing natural seawater under freely corroding and potentiostat-controlled electrochemical conditions while undergoing corrosion-fatigue-testing. The results of this investigation reveal significantly distinct differences among the four alloys under the conditions of corrosion fatigue. Both seawater and potential acted to accelerate crack growth rates in the ferrous alloys, which proved to be much more sensitive to seawater and negative potential than the nonferrous alloys studied. The titanium alloy exhibited no measurable sensitivity to either seawater or negative potential. The aluminum alloy exhibited only moderate sensitivity to seawater and beneficial effects from both positive and negative potentials. These exploratory studies indicate that high-strength marine alloys exhibit widely differing responses to corrosion-fatigue crack growth and that high-strength steels currently aimed for marine service are among the alloys most deleteriously affected.
Document Details
- Document Type
- Technical Report
- Publication Date
- Aug 30, 1976
- Accession Number
- ADA030903
Entities
People
- F. D. Bogar
- Thomas W. Crooker
- W. R. Cares
Organizations
- United States Naval Research Laboratory