Surveys of Electromagnetic Field Intensities Near Representative Higher-Power FAA Transmitting Antennas.
Abstract
The National Bureau of Standards has completed surveys of electromagnetic field intensities near the antennas of typical FAA transmitters. These include aircraft radars, ground surveillance radars, instrument landing systems, navigation equipment and communication antennas. The surveys were made with rf radiation monitors having isotropic response patterns. Commercial monitors with thermocouple sensors were used to measure electric fields between 0.5 and 24 GHz and magnetic fields between 10 and 300 MHz. Probes designed at NBS with diode detectors were used for electric field between 100 kHz and 10 GHZ. These radiation monitors cannot measure (accurately) the pulse-peak field of a radar nor the field of a scanning antenna; therefore, most of the radar surveys involved fixed antennas. The intensity in the direct beam of air route surveillance radars was greater than 10 mW/sq.cm. at distances within about 14 meters from the antennas. The intensity of airport surveillance radars was above 10 mW/sq.cm. at distances within 15 meters, except for the newer ASR-8 model. The direct beam of aircraft radars exceeded 10 mW/sq.cm. at distances ranging from 2 to 7 meters. If the time-averaging effect for antenna scanning is taken into consideration, these field values would be greatly reduced. Also, the near-zone beams of FAA antennas are not normally accessible to personnel. In accessible areas the measured fields were generally less than 1 mW/sq cm. (Author)
Document Details
- Document Type
- Technical Report
- Publication Date
- Dec 01, 1977
- Accession Number
- ADA051717
Entities
People
- Ezra B. Larsen
- John F. Shafer
Organizations
- National Institute of Standards and Technology