Ignition of Liquid Fuels in Supersonic Air Streams

Abstract

An experimental study of the ignition of liquid fuels injected transverse to a hot supersonic (M=1.65) air stream was conducted. The liquids considered were kerosene, CS2 and water as an inert control. The major variables were: air stagnation temperature in the range 1500 to 2300 F, injectant flow rate and injection angles from 90 to 45 deg upstream. The experimental observations were: temperature measurements on the wall near the injector and in the flow downstream of injection, self-luminosity photographs and infrared photographs taken with a Thermographic camera. Special attention was directed at the behavior of the liquid layer that had previously been found to form near the injector. No unequivocal evidence of ignition of either fuel was found for normal injection at these conditions. However, clear evidence of ignition of CS2 was found for the upstream injection angle for T sub o > or = 2030 F and 80 < or = P sub j < or = 135 psi. High injection pressures and thus high flow rates failed to produce ignition at any temperature tested. Evidence of CS2 ignition was found in the infrared photographs and wall and in-stream temperature measurements simultaneously. The infrared photographs indicated possible ignition of the kerosene for upstream injection, but this could not be corroborated with the temperature measurements. (Author)

Open PDF

Document Details

Document Type
Technical Report
Publication Date
May 01, 1978
Accession Number
ADA055951

Entities

People

  • Joseph A. Schetz
  • Steven C. Cannon

Organizations

  • Virginia Tech

Tags

Communities of Interest

  • Weapons Technologies

DTIC Thesaurus Topics

  • Cameras
  • Combustion
  • Combustion Products
  • Combustors
  • Fuel Injection
  • Heat Of Combustion
  • Heat Transfer
  • Ignition
  • Ignition Lag
  • Isotherms
  • Measurement
  • Ramjet Engines
  • Stagnation Pressure
  • Stagnation Temperature
  • Supersonic Combustion
  • Supersonic Combustion Ramjet Engines
  • Video Recording

Readers

  • Combustion and Flow Dynamics.
  • Combustion science or combustion engineering.
  • Image Processing and Computer Vision.

Technology Areas

  • Hypersonics
  • Hypersonics - Hypersonic Boundary Layers
  • Hypersonics - Hypersonic Flow