An Investigation Into the Susceptibility of Tantalum and Vanadium to Slow Strain-Rate Embrittlement Due to Oxygen, Nitrogen and Carbon.

Abstract

The phenomena of slow strain-rate embrittlement was studied in three metal-interstitial systems, tantalum-oxygen, vanadium-oxygen and tantalum-nitrogen. The embrittlement of tantalum by oxygen was investigated on specimens containing four levels of oxygen -- 0.33, 0.50, 0.85 and1.30 atomic percent. All of the compositions showed embrittlement between 500-1000K in specimens deformed at epsilon = 8.8 x 10 to the 4th power sec to the minus one power. Associated with the embrittling phenomenon, and occurring in the same temperature range where the ductility is dropping, and three dynamic strain-aging effects: (a) a yield stress plateau from 300-600K, (b) serrated yielding from 453-600K and an increasing work hardening rate from 300-600K; Scanning electron microscope studies show that failures were by microvoid coalescence at low temperatures changing to a predominantly intergranular mode in the embrittlement range. Study of the vanadium-oxygen system also showed an embrittlement region between 600-875K. This embrittlement was accompanied by a yield stress plateau between 400-600K, an increasing work hardening rate between 300-650K and serrated yielding from 525K to 650K. A high level of titanium impurity limited testing to low oxygen concentrations. Tests on the tantalum-nitrogen system concluded that nitrogen did not produce slow strain-rate embrittlement in this metal although it served as a potent room temperature strengthener. The interval in which embrittlement is expected in this metal is at a sufficiently high temperature that dynamic recovery and sofening take place. (Author)

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Aug 31, 1980
Accession Number
ADA090199

Entities

People

  • A. E. Diaz
  • R. E. Reed-hill

Organizations

  • University of Florida

Tags

Communities of Interest

  • Human Systems

DTIC Thesaurus Topics

  • Alloys
  • Electron Microscopes
  • Elements
  • Failure Mode And Effect Analysis
  • Grain Boundaries
  • Hardening
  • High Temperature
  • Hydrogen Embrittlement
  • Low Temperature
  • Materials
  • Mechanical Properties
  • Scanning Electron Microscopes
  • Strain Rate
  • Tantalum
  • Titanium
  • Transition Metals
  • Vanadium

Fields of Study

  • Materials science

Readers

  • Materials Science (Mechanical Engineering).
  • Mathematics or Statistics
  • Powder metallurgy of Titanium alloys.

Technology Areas

  • Microelectronics