Effect of Crosslinking on the Physical Properties of an Epoxy Resin.
Abstract
An epoxy system consisting of diglycidyl ether of butanediol, DGEB, cured with 4-4' diaminodiphenyl sulfone, DDS, has been used for a study of effect of crosslinking density on the properties of the epoxy resin. Because of the low curing rate at room temperature and the low glass-transition temperature, this system was amenable to a wide range of controlled crosslinking density. The crosslinking density was monitored by FTIR, which followed the change in concentration of the epoxy groups during the curing reaction. The density was found to increase linearly with the crosslinking density. The modulus, the upper yield point, the lower yield point, and the degree of retraction of a deformed sample all increased with the degree of crosslinking. The thermally stimulated depolarization, TSD, beta-peak was found to vary with crosslinking density, but the gamma-peak was not changed. The TSD alpha-peak was found to decrease in strength, but increased in temperature as the crosslinking density increased. This observation suggests that TSD managements are a good monitor of crosslinking density of epoxy resins, particularly near the final stage of the crosslinking reaction.
Document Details
- Document Type
- Technical Report
- Publication Date
- Aug 07, 1981
- Accession Number
- ADA103658
Entities
People
- J. O. Brittain
- S. H. Carr
- T. D. Chang
Organizations
- Northwestern University