Growth of InP Based Films Using the Hydride Growth Technique.
Abstract
A hydride growth system has been constructed that is capable of growing InGaAsP films or any ternary or binary combination. The system was designed to keep the background carrier density to a minimum as there are a number of device applications for low carrier concentration films. This was done by building a system that is leak tight down to .000001/cc, and constructing a forechamber from which the substrate can be magnetically loaded through a gate valve. Therefore, the growth zone is never opened to the atmosphere during a growth run. Thus far only InP films have been grown, but we plan to soon grow InGaAs films. The first films that were grown contained many hillocks, but their density was reduced in the later films by reducing the input HC1 concentration. The HC1 concentration in the deposition zone was increased by introducing HC1 downstream from the liquid indium. This was done to try to reduce the silicon contamination. However, we found that this greatly reduced the growth rate, and in some instances the substrate was actually etched. This also occurred when the input HC1 was not forced to come into intimate contact with the liquid indium. We, therefore, concluded that there was too much HC1 in the deposition zone which impeded the deposition process.
Document Details
- Document Type
- Technical Report
- Publication Date
- Jan 01, 1981
- Accession Number
- ADA112905
Entities
People
- Kenneth A. Jones
Organizations
- Colorado State University