Development of a System to Validate Group 3 Facsimile Equipment.
Abstract
The objective of this program is to develop a system to validate Group 3 facsimile equipment as specified in Federal Standard 1062 and 1063. (The Federal standards incorporate Electronic Industry Standards, EIA RS-465 and RS-466 respectively). The program consists of two phases. In Phase II the Validation methodology, developed in Phase I, was implemented and tested. This Technical Information Bulletin describes the Phase II effort. Section 2.0 describes the general design of the overall Validation System indicating that it is composed of four major hardware components Microporcessor System Controller; Floppy disk; Versatec V80 Printer; and DEC LA120 Keyboard Printer. The heart of the system is the controller. Sections 3.0 and 4.0 describe the hardware and software design of the controller respectively. The operator interface including keyboard commands and test parameters is described in Section 5.0. The procedures for using the Validation System is outlined in Section 6.0. Finally the results of the acceptance test are summarized in detail in section 7.0.
Document Details
- Document Type
- Technical Report
- Publication Date
- Jul 30, 1982
- Accession Number
- ADA120201
Entities
Organizations
- Delta Information Systems (United States)