A Micro-Computer Based System for High Precision Temperature Measurement Using Platinum RTD's
Abstract
A micro-computer controlled system for 10 channel high precision temperature data acquisition has been developed. The temperature sensing elements are Platinum Resistance Thermometer Devices (RTD's). Probe construction, using standard, commercially available RTD elements is described and wiring and switching requirements for the 4-wire resistance measurements are noted. The system consists of a Digital Equipment Corp. MINC-11 Computer linked, via IEEE-488 interface bus cables, to a HP (Hewlett-Packard) 34555A Digital Volt/Ohm Meter, an HP-3495A Scanner/Multiplexer, and, during calibration, a HP 2804A Quartz Thermometer. Two programs are employed: one for probe calibration and the other for the temperature measurement application. In the calibration program, the ten probes are individually calibrated against the Quartz Thermometer which has an absolute accuracy specification of + or - 0.04 C. A proportional control water bath having a thermal stability specification of + or - 0.004 C provided the common thermal medium during calibration. Currently a three point calibration spanning 6 C (37 to 43 C) is employed. The individual probe constants are computed and recorded on a computer file for access via the temperature measurement program. An initial evaluation of the precision of the calibrated RTD system against the Quartz Thermometer reading yielded an overall precision of + or - 0.0004 C and worst case error of less than + or - 0.01 C.
Document Details
- Document Type
- Technical Report
- Publication Date
- Jul 16, 1982
- Accession Number
- ADA124080
Entities
People
- William T. Matthew
Organizations
- United States Army Research Institute of Environmental Medicine