S-3A Ballast Block Final Design and Engineering Tests.
Abstract
The S-3A aircraft has (4) ejection seats. Both the pilot and copilot have Comand Eject Selector levers which allow them the option to eject all crewmembers or 'Self Eject.' If one of the aft seats is unoccupied, and 'Command Eject' is selected, the unoccupied seat will accelerate ahead of the occupied seat next to it. Two hazards exist; first, the crewmember next to the unoccupied seat could be burned by the rocket plume from the empty seat which has a higher acceleration; second, the empty seat could tumble into one of the other seats because the center of gravity and the center of rocket thrust are too far apart. To eliminate these hazards it is necessary to ballast the unoccupied seat. This is presently being done with anthropomorphic test dummies, if they can be obtained. Unfortunately these dummies have various weights and are usually damaged (i.e. arms, legs, or head missing). There is no guarantee that the center of gravity is in the proper location to prevent tumbling. To correct this potentially dangerous situation the Naval Air Systems Command tasked the Naval Air Development Center to design a ballast block. After the initial prototype was developed and tested, references (1) and (2) recommended changes to be incorporated into the final design. All of these recommendations have been incorporated into the final design. The S-3A Ballast Block is a 169 pound (77 Kg) assembly of four (4) interlocking aluminum blocks. It is used to control the trajectory of an unoccupied 1E-1 ejection seat. Tests indicate that it meets all functional and structural requirements for use in the S-3A aircraft.
Document Details
- Document Type
- Technical Report
- Publication Date
- Feb 22, 1984
- Accession Number
- ADA147685
Entities
People
- D. Lorch
- J. Quartuccio
Organizations
- Naval Air Warfare Center Warminster