Strength and Deformation Properties of Earth-Rock Mixtures.

Abstract

Results and analyses of a series of strain-controlled, consolidated-undrained and unconsolidated-undrained triaxial compression tests performed on various gradations of artificially blended earth-rock mixtures and on a natural earth-rock mixture associated with the construction of DeGray Dam, Caddo River, Arkansas, are presented. It was shown that R triaxial tests on scalped/replaced gradations of a soil-rock mixture may yield substantially overconservative estimates of the strength of the full-scale material depending on the gravel content and plasticity of the fine fraction. On the other hand, Q tests on scalped/replaced specimens may over-estimate the strength of the full-scale gradation. It is recommended that triaxial testing of earth-rock mixtures be performed on the full-scale material (large specimens) or at least on the altered gradation obtained by removing (scalping) no more than 10% by weight of the full-scale material's largest particles. While this investigation did not seek to determine the effects on strength-deformation behavior of earth-rock mixtures of plasticity of the fines. Test results suggest that plasticity of the fines influences the differences seen between strengths of full-scale material as compared to scalped/replaced material.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Sep 01, 1985
Accession Number
ADA160701

Entities

People

  • R. T. Donaghe
  • V. H. Torrey Iii

Tags

Communities of Interest

  • Air Platforms
  • C4I
  • Weapons Technologies

DTIC Thesaurus Topics

  • Actuators
  • Army Corps Of Engineers
  • Back Pressure
  • Civil Engineering
  • Engineering
  • Engineers
  • Friction
  • Hydraulic Actuators
  • Internal Friction
  • Laboratory Equipment
  • Materials
  • Measurement
  • Mechanics
  • Particles
  • Pore Pressure
  • Soil Mechanics
  • Test Equipment

Readers

  • Geotechnical Engineering.
  • Mechanical Engineering/Mechanics of Materials.
  • Pavement Materials Engineering.