Elasticity, Tear Strength and Strength of Adhesion of Soft PVC Gels.

Abstract

An experimental study is described of the tensile modulus E of elasticity, tear strength G sub c and strength G sub a of adhesion of a Mylar substrate, for PVC gels prepared with a wide range of PVC concentrations and with four different plasticizers. The modulus E, measured under quasi-equilibrium conditions, was found to be approximately proportional to C superscript 3, where c is the volume concentration of PVC. The tensile behavior suggests that the molecular strands comprising the undiluted elastic network are relatively short, only about 26 C atoms long. G sub c under threshold conditions was found to vary with C superscript 2.25 and to be considerably larger than (about 10X), the value expected for a molecular network of short PVC chains. This difference is attributed to yielding of crystallites before molecular rupture can take place. Adhesion to Mylar of PVC gels was relatively weak. Both the tear strength and strength of adhesion were strongly dependent upon rate of fracture propagation and upon temperature, in good accord with the WLF rate-temperature equivalence for simple glass-forming substances. Thus, the strength of PVC gels appears to be determined largely by the glass temperature of the composition, and not by the amount or type of plasticizer except insofar as they affect the glass temperature. Keywords: Detachment, Plastisols, Stiffness.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Apr 01, 1986
Accession Number
ADA166356

Entities

People

  • Alan Neville Gent
  • N. Shimizu

Organizations

  • University of Akron

Tags

Communities of Interest

  • Energy and Power Technologies
  • Weapons Technologies

DTIC Thesaurus Topics

  • Air Force
  • Chemistry
  • Elastic Properties
  • Glass
  • Glass Transition Temperature
  • High Temperature
  • Materials
  • Measurement
  • Military Research
  • Modulus Of Elasticity
  • Physical Properties
  • Polymers
  • Stiffness
  • Stress Strain Relations
  • Tensile Modulus
  • Transition Temperature
  • Transitions

Readers

  • Materials Science and Engineering.
  • Mechanical Engineering/Mechanics of Materials.
  • Polymer Science and Engineering.