Undrained Stress-Strain Behavior of Unsaturated Sands. Volume 1.

Abstract

This final report provides the details of an investigation on the undrained stress strain behavior of partly saturated sands under controlled laboratory conditions. A new triaxial test setup was developed during the previous years of this research study. Thus, the two purposes of the investigation reported in this report were a) to evaluate the usefulness of the new soil test procedure, and b) to determine the behavior of the unsaturated sand samples. An axis translation technique was used to monitor pore water pressure changes during the tests and this appeared to work well. A special ceramic porous stone was used to be able to measure pore water and air pressures separately. The conclusions drawn from this research are that the stress-strain behavior changes little with respect to saturation level until the level approaches about 95%. The initial tangent modulus decreased with an increase in saturation. For lower saturated samples, there seems to be no difference between an undrained and a drained test. The dilation potential of the sand increased with strain rate. The strain rate had some effect on the initial modulus of only the dense samples of sand.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Jan 25, 1988
Accession Number
ADA191924

Entities

People

  • Jey K. Jeyapalan
  • Rolland G. Boehm

Organizations

  • University of Wisconsin–Madison

Tags

Communities of Interest

  • Advanced Electronics
  • Energy and Power Technologies

DTIC Thesaurus Topics

  • Air Pressure
  • Back Pressure
  • Equations
  • Gas Laws
  • Materials
  • Measurement
  • Mechanics
  • Pore Pressure
  • Pressure Measurement
  • Saturated Soils
  • Saturation
  • Shear Strength
  • Strain Rate
  • Stress Strain Relations
  • Stresses
  • Surface Tension
  • Test And Evaluation

Readers

  • Geotechnical Engineering.
  • Mechanical Engineering/Mechanics of Materials.
  • Systems Analysis and Design