On the Measurement of Local Strain and Temperature during the Formation of Adiabatic Shear Bands in Steels.
Abstract
An experimental study was conducted to determine local strain, local strain rate, and temperature distribution within an adiabatic shear band during its formation. Thin-walled tubular specimens were deformed at dynamic rates in a torsional Kolsky bar (torsional split-Hopkinson bar) and direct observation of the strain localization process was made through ultra high-speed photography of a grid pattern deposited on the specimen's surface. Temperature measurements were effected using an array of sixteen infrared radiation detectors. The optical system employed allows each detector to focus on a band 17 micrometers wide. Three different steels were tested: (1) an AISI 1018 cold rolled steel, (2) a low alloy structural steel (HY-100), and (3) an AISI 4340 VAR steel tempered to either of two hardnesses, HRC 44 or 55. The principal goal of the investigation was to relate initial geometric defects in specimen geometry to the timing of stress collapse during shear band development. A comparison of experimental results with predictions based on the analysis of Molinari and Clifton showed good agreement. In addition, quasi-static tests on the same materials revealed two significant differences between dynamic and quasi-static plastic deformation. First, localization of strain into a shear band occurs in dynamic deformation, but never quasi-statically, and second, the magnitude of the strain fracture is always considerably greater in quasi-static deformation than dynamically. (kt)
Document Details
- Document Type
- Technical Report
- Publication Date
- Sep 01, 1969
- Accession Number
- ADA214368
Entities
People
- J. Duffy
- Y. C. Chi
Organizations
- Brown University