Development of an Actively Compliant Underwater Manipulator
Abstract
This thesis describes the design, construction, and evaluation of an actively complaint underwater manipulator for installation on the underwater remotely operated vehicle (ROV) JASON. The goal of this work has been to produce a high fidelity force-controllable manipulator exhibiting no backlash, low striction/friction, high back-driveability, wide dynamic range, and possessing a large work envelope. By reducing the inherent dynamic nonlinearities, a wide range of joint compliances can realistically be achieved. This feature is important when implementing various force control schemes, particularly impedance control. In addition, a mechanically 'clean' transmission reduces the need for sensors and allows the user to rely on integral motor sensors to provide torque, position, and velocity information. A three axis manipulator rated to full ocean was built. Each of the revolute joints is driven by a DC brushless sensorimotor working through a multi-stage cable/pulley transmission. The manipulator mechanism and wiring is fully enclosed by cast aluminum housing filled with mineral oil. Mineral oil functions to pressure compensate and lubricate the system. Exterior surfaces of the manipulator are smooth and continuous, and were designed to act as work surfaces. Joints one and two have a 240 deg range of motion, while joint three can rotate 380 deg. The manipulator transmissions are modeled and predictions of manipulator stiffness, dynamic range, payload capacity, and hysteresis are compared with the results of tests conducted on the actual system. Operation of the cable/pulley transmissions are evaluated and suggestions for improvements are given. Theses. (jhd)
Document Details
- Document Type
- Technical Report
- Publication Date
- Dec 01, 1988
- Accession Number
- ADA218652
Entities
People
- David M. Dipietro
Organizations
- Woods Hole Oceanographic Institution