The Influence of Temperature and Composition on the Activation Energy for Creep in Binary Aluminum Lithium Alloys
Abstract
With the fast pace of technology in the aerospace industry, there are increasing demands for higher strength and stiffness in structural materials but with reduced weight and improved formability. Aluminum alloys have been widely used in the construction of aerospace vehicles because of their high strength to weight ratio, forming characteristics and corrosion resistance. An investigation was conducted to determine the temperature and composition dependence on the activation energy for creep of A1-0.5wt.pct.lithium, A1-1.Owt.pct.Li, and A1-2. Owt.pc+.Li alloys. A series of isothermal tests were conducted utilizing constant true stress creep tests, with nominal temperatures ranging from 300 C to 500 C. Temperature cycling tests involved a range of 10 C for each test. Experimental results indicate all three alloys behave as a class II alloy (pure metal class) with a stress exponent, n, approximately equal to 5. In addition, subgrain formation was observed in association with the primary stage of creep. The activation energy for creep of the A1-0.5wt.pct.Li and A1-1.Owt.pct.Li alloys was observed to b essentially the same as that for pure Aluminum.
Document Details
- Document Type
- Technical Report
- Publication Date
- Dec 01, 1990
- Accession Number
- ADA242299
Entities
People
- Robert L. Seaton
Organizations
- Naval Postgraduate School