Tribological Studies of Silicon for Magnetic Recording Applications (Invited)
Abstract
Read-write sliders made of silicon using integrated-circuit technology offer advantages of low-cost and high volume production. In the present study our objective is to investigate whether the friction and wear performance of bare silicon is adequate for disk drive application or whether certain coatings/treatments are necessary for low friction and wear. Macrotribological experiments have been performed with various pin/slider materials and magnetic disks in a modified disk drive. Microtribological studies have also been conducted on silicon using a friction force microscope. Based on macrotests, we found that the friction and wear performance of bare silicon is not adequate. With single and polycrystalline silicon, transfer of amorphous carbon from the disk to the pin/slider and oxidation-enhanced fracture of pin/ slider material followed by oxidation of the transfer coating is responsible for degradation of the sliding interface and consequent friction increase in ambient air. With dry-oxidized or PECVD-SiO2-coated silicon, no significant friction increase or interfacial degradation was observed in ambient air. In the absence of an oxidizing environment (in dry nitrogen), the coefficient of friction decreased from 0.2 to 0.05 following amorphous carbon transfer for the materials tested. Nanoscratching/nanowear and nanoindentation studies also indicate that coated silicon is superior to bare silicon.
Document Details
- Document Type
- Technical Report
- Publication Date
- Oct 05, 1993
- Accession Number
- ADA270878
Entities
People
- Bharat Bhushan
- Vilas N. Koinkar
Organizations
- Ohio State University