Attachment Techniques for High Temperature Strain
Abstract
Attachment methods for making resistive strain measurements to 2500 deg F were studied. A survey of available strain gages and attachment techniques was made, and the results are compiled for metal and carbon composite test materials. A theoretical analysis of strain transfer into a bonded strain gage was made, and the important physical parameters of the strain transfer medium, the ceramic matrix, were identified. A pull tester to measure Pull-out tests on commonly used strain gage cements indicated that all cements tested displayed adequate strength for good strain transfer. Rokide flame sprayed coatings produced significantly stronger bonds than ceramic cements. An in-depth study of the flame spray process produced simplified installation procedures which also resulted in greater reliability and durability. Application procedures incorporating improvements made during this program are appended to the report. Strain gages installed on carbon composites, Rene' 41, 316 stainless steel, and TZM using attachment techniques developed during this program were successfully tested to 2500 deg F. Photographs of installation techniques, test procedures, and graphs of the test data are included in this report.
Document Details
- Document Type
- Technical Report
- Publication Date
- Jan 01, 1993
- Accession Number
- ADA274766
Entities
People
- Steve P. Wnuk Jr.