The Effects of Alloying Elements on the Strength and Cooling Rate Sensitivity of Ultra-Low Carbon Alloy Steel Weld Metals.
Abstract
A study was conducted to evaluate the effect of weld cooling rate on the strength of autogenous GTAW deposited weld metal. The basic weld metal composition was based on a low carbon bainite metallurgical system. The weld metal yield strength goal was 130 ksi, needed to surpass the current HY-13O weld metal requirements. Vacuum Induction Melted (VIM) heats of steel were produced and processed into 3/4' thickness plates. The autogenous gas tungsten are welds (GTAW) on the parent steel plates were produced under two different heat input conditions. Tensile specimens were produced from the weldments; specimens from certain heats were subjected to gleeble thermal simulations of multi-pass welding conditions using the Gleeble 1500. All specimens were then evaluated for yield and ultimate tensile strength. From the data presented, it was found that the experimental compositions studied were less sensitive to cooling rate than current HY-130 welding consumables. The compositions tested approached the target yield strength of 130 ksi, but further work is necessary in this area.
Document Details
- Document Type
- Technical Report
- Publication Date
- Mar 01, 1994
- Accession Number
- ADA290681
Entities
People
- M. G. Vassilaros
Organizations
- Naval Surface Warfare Center Carderock Division