Low-Speed Wind-Tunnel Investigation of a Triangular Sweptback Air Inlet in the Root of a 45 deg Sweptback Wing

Abstract

A low-speed investigation has been conducted in the Langley two-dimensional low-turbulence tunnel to study a sweptback wing-root air-inlet configuration believed suitable for transonic-speed jet-powered airplanes. The test configurations consisted of a basic model with an NACA 64-008 wing with quarter-chord sweepback of 45 deg mounted in the mid-wing position on a fuselage of fineness ratio 6.7, and an inlet model which had a triangular-shaped sweptback inlet installed in the wing root. Installation of the wing-root inlet was accomplished with no significant effects on the force characteristics of the basic wing. The fuselage boundary layer entering the inlet was thin and required no boundary-layer-control device ahead of the inlet. Near unity inlet total-pressure recovery was obtained to about 86 percent of the maximum lift coefficient over a large range of inlet-velocity ratio. Maximum local velocities over the external surfaces of the inlet sections were no greater than those over the wing at a midspan station for the assumed high-speed operating conditions.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Jan 01, 1955
Accession Number
ADA377347

Entities

People

  • Arvid L. Keith Jr.
  • Jack Schiff

Organizations

  • National Aeronautics and Space Administration

Tags

Communities of Interest

  • Air Platforms

DTIC Thesaurus Topics

  • Aerodynamic Characteristics
  • Aerodynamic Configurations
  • Aircrafts
  • Airplanes
  • Boundary Layer
  • Boundary Layer Control
  • Fineness Ratio
  • Flow
  • Jet Aircraft
  • Layers
  • Leading Edges
  • Mach Number
  • Measurement
  • Pressure Distribution
  • Static Pressure
  • Swept Wings
  • Sweptback Wings

Fields of Study

  • Physics

Readers

  • Aerodynamics.