Computational Fluid Dynamics Testing for Drag Reduction of an Aircraft Laser Turret
Abstract
A computational study was conducted on the use of aft-mounted fairings for passive drag reduction on a sphere at Re=866,000. The sphere dimensions and operating Reynolds number were selected to approximate the flow around a proposed aircraft laser turret for which experimental data was available. To establish the validity of the computational model, flow predictions were compared to sphere data available in the open literature. The model, exercised in both the laminar and turbulent modes, showed good agreement with the published data. Two proposed laser turret fairings were then evaluated computationally: a large fairing (beginning at 49.5 degrees past the sphere apex) and a small fairing (beginning at 58.95 degrees past the sphere apex). Existing wind tunnel models were used to generate axisymmetric computational grids that approximated the geometry of these models. The computed flow field and associated drag reduction were comparable to the experimental results obtained from the wind tunnel testing. Differences in drag from the model to the experiment were explained by the axisymmetric simplifications made in the model. Finally, a new, optimized fairing model was designed which eliminated the separation zone on the aft portion of the sphere. The optimized model predicted double the drag reduction compared to the large fairing computational model.
Document Details
- Document Type
- Technical Report
- Publication Date
- Mar 01, 2000
- Accession Number
- ADA380295
Entities
People
- Gregory J. Schwabacher
Organizations
- Air Force Institute of Technology