Effect of Sputtering Parameters on Tantalum Coatings for Gun Bore Applications
Abstract
Tantalum offers a number of attractive properties for gun bore coating applications, including a high melting temperature, high ductility, and an environmentally friendly deposition method. However, vapor-deposited tantalum can appear in both the characteristic body- centered-cubic phase found in the bulk material, and in a very brittle and less desirable "beta" phase. Presence of the beta phase in bore coatings is considered undesirable because of its brittleness and resulting failure as the coating is stressed. A high-rate triode sputtering system with a cylindrical coating geometry was used to produce thick tantalum coatings on 4340 steel, smooth bore cylindrical substrates. A systematic series of tests was performed to evaluate the effects of sputtering gas species (argon, krypton, xenon) and substrate temperature (100 degrees to 300 degrees C) during deposition on the phase and microstructure of the coatings. Heavier sputtering gases and higher substrate temperatures were found to promote the formation of body-centered-cubic phase tantalum coatings. Use of a movable target assembly was shown to promote the production of dense, single-phase tantalum coatings.
Document Details
- Document Type
- Technical Report
- Publication Date
- Aug 01, 2000
- Accession Number
- ADA382266
Entities
People
- Dean W. Matson
- Donald Windover
- Edwin D. Mcclanahan
- Joseph P. Rice
- Sabrina L. Lee
Organizations
- United States Army Armament Research, Development and Engineering Center