Piloted Simulator Investigation of Techniques to Achieve Attitude Command Response with Limited Authority Servos

Abstract

The purpose of the study was to develop generic design principles for obtaining attitude command response in moderate to aggressive maneuvers without increasing SCAS series servo authority from the existing +/- 10%. In particular, to develop a scheme that would work on the UH-60 helicopter so that it can be considered for incorporation in future upgrades. The basic math model was a UH-60A version of GENHEL. The simulation facility was the NASA-Ames Vertical Motion Simulator (VMS). Evaluation tasks were Hover, Acceleration-Deceleration, and Sidestep, as defined in ADS-33D-PRF for Degraded Visual Environment (DVE). The DVE was adjusted to provide a Usable Cue Environment (UCE) equal to two. The basic concept investigated was the extent to which the limited attitude command authority achievable by the series servo could be supplemented by a 10%/sec trim servo. The architecture used provided angular rate feedback to only the series servo, shared the attitude feedback between the series and trim servos, and when the series servo approached saturation the attitude feedback was slowly phased out. Results show that modest use of the trim servo does improve pilot ratings, especially in and around hover. This improvement can be achieved with little degradation in response predictability during moderately aggressive maneuvers.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Jan 01, 2002
Accession Number
ADA408332

Entities

People

  • David L. Key
  • Robert K. Heffley

Organizations

  • National Aeronautics and Space Administration

Tags

Communities of Interest

  • Weapons Technologies

DTIC Thesaurus Topics

  • Aircrafts
  • Control Systems
  • Deceleration
  • Environment
  • Feedback
  • Flight Control Systems
  • Helicopters
  • Maneuvers
  • Military Aircraft
  • Perception
  • Rotary Wing Aircraft
  • Saturation
  • Simulations
  • Simulators
  • Space Sciences
  • Test And Evaluation
  • Workload

Readers

  • Aviation Science / Aeronautics.
  • Control Systems Engineering.