Aerocapture Guidance Methods for High Energy Trajectories

Abstract

This thesis investigates enhancements of an existing numerical predictor-corrector aerocapture guidance algorithm (PredGuid). The study includes implementation of an energy management phase prior to targeting with a generic method of transition and replacement of heuristic features with more generic features. The vehicle response during energy management was modeled as a second-order spring/mass/damper system. Phase change occurred when two conditions were met: First, the vehicle could fly a constant bank angle of 1100 for the remainder of the trajectory and have the resulting apogee below or within a given tolerance above the target apogee. Second, the predicted final energy indicated that the vehicle would be on an elliptical, not hyperbolic, trajectory. So as to incorporate generic features, modeling of a separate lift down phase was replaced by using a lift-down condition to determine phase change and biasing to the same lift- down condition during targeting. Also, use of a heuristic sensitivity to calculate the first corrected bank angle was replaced by a simple smart guessing' algorithm. Finally, heuristic lateral corridor boundaries were replaced by boundaries based on percentage of forward velocity.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
May 23, 2003
Accession Number
ADA416545

Entities

People

  • Jennifer L. Dicarlo

Organizations

  • Air Force Institute of Technology

Tags

Communities of Interest

  • Air Platforms
  • Energy and Power Technologies

DTIC Thesaurus Topics

  • Air Force
  • Apogees
  • Atmosphere Models
  • Coordinate Systems
  • Dynamic Pressure
  • Energy
  • Energy Management
  • Equations
  • Equations Of Motion
  • Flight Paths
  • Guidance
  • High Energy
  • Navigation
  • Orbits
  • Simulations
  • Standards
  • Trajectories

Readers

  • Applied Combinatorial Optimization and Logic Circuit Design.
  • Computational Modeling and Simulation
  • Space Exploration and Orbital Mechanics.