Numerical Investigation on Flow Field and Heat Transfer Phenomena in Multi-Hole Cooling Configurations
Abstract
A transpiration cooled flat plate configuration is investigated numerically by application of a 3-D conjugate fluid flow and heat transfer solver, CHT-Flow. The geometrical setup and the fluid flow conditions are derived from modern gas turbine combustion chambers. The plate is composed of three layers, a substrate layer (CMSX-4) with a thickness of 2 mm, a bondcoat (MCrAIY) with a thickness 0.15 mm, and a thermal barrier coating (EB-PVD, Yttrium stabilized ZrO2) with a thickness 0.25 mm, respectively. The results of aerothermal calculations with adiabatic wall boundary conditions and the results of aerothermal calculation with fixed surface temperatures are compared to conjugate calculations that comprise both the fluid flow and the solid body. For conjugate calculations, there are no boundary conditions prescribed on the wall surfaces that are in contact with the fluid flow. The surface temperatures from the conjugate calculations are used as a boundary condition in the case of the aerothermal calculations with fixed surface temperatures. For the conjugate calculations the numerical grid contains the cooling holes, the solid body, and the main flow area upon the plate. For the aerothermal investigations the grid contains the cooling holes and the main flow area. The transpiration cooling is realized by finest drilled holes with a diameter of 0,2 mm that are shaped in the region of the thermal barrier coating. The holes are inclined with an angle of 300. Two different configurations are investigated that differ in the shaping of the holes in their outlet region.
Document Details
- Document Type
- Technical Report
- Publication Date
- Mar 01, 2003
- Accession Number
- ADA419226
Entities
People
- Dieter E. Bohn
- Norbert Moritz
Organizations
- RWTH Aachen University