PLIF Flow Visualization of a Supersonic Coil Nozzle (Postprint)
Abstract
This paper describes Planar Laser-Induced Fluorescence (PLIF) flow visualization of a supersonic nozzle with supersonic injection. The nozzle simulates Chemical Oxygen Iodine Laser (COIL) flow conditions with non-reacting, cold flows, where the injected flow was seeded with iodine. A laser sheet near 565nm excited the iodine, and the fluorescence was imaged with a gated, CCD camera. Spanwise and steamwise images were taken, where the relative concentration of the injected to primary flow, turbulent structures, and penetration distance of the injected flow were identified. These images qualitatively revealed a lack of mixing of the secondary (injected) and primary flows at the centerline of the nozzle, even far downstream of the throat. Quantitative data of the penetration of the secondary flow, with varying primary to secondary flow rate ratios, helped identify the shallow angle of the injectors as an inhibitor of secondary penetration even at relatively low primary flow rates. From the PLIF results, this nozzle is characterized as a poor mixer and would not be recommended as a nozzle that produces a well-mixed medium, as required with chemical lasers. This work precedes a project that will use PLIF results to design a well-mixed supersonic nozzle with supersonic injection. The results will be compared to and enable validation of computational fluid dynamics (CFD) predictions of the designed nozzle.
Document Details
- Document Type
- Technical Report
- Publication Date
- Oct 16, 2006
- Accession Number
- ADA471556
Entities
People
- C. R. Truman
- Carrie A. Noren
- Gordon D. Hager
- Gretchen Gothschopf
- Peter V. Vorobieff
- Timothy J. Madden
- Ty Perschbacher
Organizations
- Air Force Research Laboratory