Potential Flow Forces and Moments from Selected Ship Flow Codes in a Set of Numerical Experiments. Appendix Q - Minimum and Maximum Plots for 0-DOF Motion of Model 5613 in Waves
Abstract
This appendix contains plots and tables related to the minimum and maximum value of each variable versus wave steepness for the 0-DOF prescribed motions of Model 5613 in task 2. The plots are found in Figures Q-1 through Q-226. For each variable, speed, and heading there is one plot that depicts the results from all the codes. If f stands for a time-dependent variable, then the quantities plotted are the minimum and maximum of f* == [f-(f)] over H/lambda where (f) is the mean. Only filtered values f are used since filtered values lessen the impact of spikes that probably originate in numerical filtering schemes in the codes. Linear variation as a function of the amplitude appears as a horizontal line. Quadratic variation appears as a straight line with a nonzero slope. Tables Q-1 through Q-1808 in this appendix correspond to the plots. Following each plot is one table for each of the eight codes for which data were received. The tables give information about the mean, the minimum and maximum of the unfiltered variable, the minimum and maximum of the filtered variable, and the starred function depicted in the figure. For the corresponding time history plots, the reader is referred to Appendix G.
Document Details
- Document Type
- Technical Report
- Publication Date
- May 01, 2008
- Accession Number
- ADA495950
Entities
Organizations
- Naval Surface Warfare Center Carderock Division