Consequences of Anode Interfacial Layer Deletion. HCl-Treated ITO in P3HT:PCBM-Based Bulk-Heterojunction Organic Photovoltaic Devices
Abstract
In studies to simplify the fabrication of bulk-heterojunction organic photovoltaic (OPV) devices, it was found that when glass/tin-doped indium oxide (ITO) substrates are treated with dilute aqueous HCl solutions, followed by UV-ozone (UVO), and then used to fabricate devices of the structure glass/ITO/P3HT:PCBM/LiF/Al, device performance is greatly enhanced. Light-to-power conversion efficiency (Eff) increases from 2.4% for control devices in which the ITO surface is treated only with UVO, to 3.8% with the HCl + UVO treatment - effectively matching the performance of an identical device having a PEDOT:PSS anode interfacial layer. The enhancement originates from increases in VOC from 463 mV to 554 mV, and FF from 49% to 66%. The modified-ITO device also exhibits a 4x enhancement in thermal stability versus an identical device containing a PEDOT:PSS anode interfacial layer. To understand the origins of these effects, the ITO surface is analyzed as a function of treatment by ultraviolet photoelectron spectroscopy work function measurements, X-ray photoelectron spectroscopic composition analysis, and atomic force microscopic topography and conductivity imaging. Additionally, a diode-based device model is employed to further understand the effect of ITO surface treatment on device performance.
Document Details
- Document Type
- Technical Report
- Publication Date
- Jan 01, 2010
- Accession Number
- ADA532703
Entities
People
- Benjamin J. Leever
- Jonathan D. Servaites
- Jun Liu
- Mark Hersam
- Michael D. Irwin
- Michael F. Durstock
- Tobin J. Marks
Organizations
- Northwestern University