Report of NPSAT1 Battery Thermal Contact Resistance Testing, Modeling and Simulation
Abstract
Thermal modeling is an important part of spacecraft design, especially where critical components have narrow operating temperature limits. For the Naval Postgraduate School?s NPSAT1 spacecraft, the lithium ion battery is the spacecraft component with the smallest temperature range of 0?C to 45?C during operation. Thermal analysis results, however, can only provide adequate results if there is sufficient fidelity in thermal modeling. Arguably, the values used in defining thermal coupling for components are the most difficult to estimate because of the many variables that define them. This document describes the work performed by the authors starting in the 2012 winter quarter as part of the SS3900 directed study course. The objectives of the study were to determine an adequate thermal model of the NPSAT1 battery as a lumped capacitance model, and an appropriate value of thermal resistance between the battery and its mounting surface for three thermal interfaces: metal-to-metal (bolted interface), Kapton(trade name), and Chotherm(trade name) 1671. These objectives were performed through testing in a thermal-vacuum chamber with controlled boundary conditions. Modeling and simulation using the NX I-DEAS Thermal Model Generator software was performed to duplicate the test results in simulation. Agreement between the simulations and testing was achieved with differences ranging between +4?C and -8?C for the metal-to-metal interface, to as low as +2?C to -1?C using an elastomeric thermal interface material (Chotherm(trade name) 1671). The test-validated thermal model can then be incorporated into the larger NPSAT1 thermal model tospecifically evaluate battery temperatures for various flight operations.
Document Details
- Document Type
- Technical Report
- Publication Date
- Oct 01, 2012
- Accession Number
- ADA566672
Entities
People
- Bryce Donovan
- Daniel Sakoda
- Ronald Phelps
Organizations
- Naval Postgraduate School