Investigation of Physical and Chemical Delay Periods of Different Fuels in the Ignition Quality Tester (IQT)

Abstract

This paper investigates the physical and chemical ignition delay (ID) periods in the constant volume combustion chamber of the Ignition Quality Tester (IQT). IQT was used to determine the Derived Cetane Number (DCN) according to ASTM D6890-10a standards. The fuels tested were ultra low sulfur diesel (ULSD), jet propellant-8 (JP-8), two synthetic fuels of Sasol IPK and F-T SPK (S-8). A comparison was made between the DCN and cetane number (CN) determined according to ASTM-D613 standards. Tests were conducted under steady state conditions at a constant pressure of 21 bar, and various air temperatures ranging from 778 K to 848 K. The rate of heat release (RHR) was calculated from the measured pressure trace and a detailed analysis of the RHR trace was made particularly for the autoignition process. Tests were conducted to determine the physical and chemical delay periods by comparing results obtained from two tests. In the first test, the fuel was injected into air according to ASTM standards. In the second test, the fuel was injected into nitrogen. The point at which the two resultant pressure traces separated was considered to be the end of the physical delay period. The effects of the charge temperature on the total ID as defined in ASTM D6890-10a standards, as well as on the physical and chemical delays were determined. It was noticed that the physical delay represented a significant part of the total ID over all the air temperatures covered in this investigation. Arrhenius plots were developed to determine the apparent activation energy for each fuel using different IDs. The first was based on the total ID measured according to ASTM standards. The second was the chemical delay determined in this investigation. The activation energy calculated from the total ID showed higher values for lower CN fuels except Sasol IPK.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Nov 03, 2012
Accession Number
ADA574671

Entities

People

  • Eric Sattler
  • Naeim Henein
  • Tamer Badawy
  • Ziliang Zheng

Organizations

  • Wayne State University

Tags

Communities of Interest

  • Energy and Power Technologies
  • Materials and Manufacturing Processes

DTIC Thesaurus Topics

  • Air Temperature
  • Autoignition
  • Burning Rate
  • Chambers
  • Chemical Reaction Properties
  • Chemical Reactions
  • Combustion
  • Combustion Chambers
  • Endothermic Reactions
  • Energy
  • Engines
  • Exothermic Reactions
  • Flash Point
  • Heat Of Activation
  • Ignition
  • Ignition Lag
  • Synthetic Fuels

Fields of Study

  • Agricultural and Food sciences

Readers

  • Combustion science or combustion engineering.
  • Petroleum Engineering