Use of B-Spline in the Finite Element Analysis: Comparison with ANCF Geometry

Abstract

This paper examines the limitations of using B-spline representation as an analysis tool by comparing its geometry with the nonlinear finite element absolute nodal coordinate formulation (ANCF) geometry. It is shown that while both B-spline and ANCF geometries can be used to model non-structural discontinuities using linear connectivity conditions, there are fundamental differences between B-spline and ANCF geometries. First, while B-spline geometry can always be converted to ANCF geometry, the converse is not true; that is, ANCF geometry cannot always be converted to B-spline geometry. Second, because of the rigid structure of the B-spline recurrence formula, there are restrictions on the order of the parameters and basis functions used in the polynomial interpolation; this in turn can lead to models that have significantly larger number of degrees of freedom as compared to those obtained using ANCF geometry. Third, in addition to the known fact that B-spline does not allow for straight forward modeling of T-junctions, B-spline representation cannot be used in a straight forward manner to model structural discontinuities. It is shown in this investigation that ANCF geometric description can be used to develop new spatial chain models governed by linear connectivity conditions which can be applied at a preprocessing stage allowing for an efficient elimination of the dependent variables. The modes of the deformations at the definition points of the joints that allow for rigid body rotations between ANCF finite elements are discussed. The use of the linear connectivity conditions with ANCF spatial finite elements leads to a constant inertia matrix and zero Coriolis and centrifugal forces. The fully parameterized structural ANCF finite elements used in this study allow for the deformation of the cross section and capture the coupling between this deformation and the stretch and bending.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Feb 04, 2011
Accession Number
ADA578917

Entities

People

  • Abdel-nasser Mohamed
  • Ahmed A. Shabana
  • Ashraf M. Hamed
  • Michael D. Letherwood
  • Paramsothy Jayakumar

Organizations

  • University of Illinois at Chicago

Tags

DTIC Thesaurus Topics

  • Centrifugal Force
  • Computer Simulations
  • Computer-Aided Design
  • Continuity
  • Discontinuities
  • Elimination
  • Finite Element Analysis
  • Frequency
  • Geometry
  • Interpolation
  • Joints
  • Mechanics
  • Nonlinear Dynamics
  • Polynomials
  • Preprocessing
  • Rotation
  • Three Dimensional

Readers

  • Approximation Theory.
  • Finite Element Method (FEM) for solving Partial Differential Equations (PDEs)
  • Structural Dynamics.