Advanced Signal Processing for Integrated LES-RANS Simulations: Anti-Aliasing Filters
Abstract
Currently, a wide variety of flow phenomena are addressed with numerical simulations. Many flow solvers are optimized to simulate a limited spectrum of flow effects effectively, such as single parts of a flow system, but are either inadequate or too expensive to be applied to a very complex problem. As an example, the flow through a gas turbine can be considered. In the compressor and the turbine section, the flow solver has to be able to handle the moving blades, model the wall turbulence, and predict the pressure and density distribution properly. This can be done by a flow solver based on the Reynolds-Averaged Navier-Stokes (RANS) approach (Davis et al. 2002). On the other hand, the flow in the combustion chamber is governed by large scale turbulence, chemical reactions, and the presence of fuel spray. Experience shows that these phenomena require an unsteady approach (Veynante and Poinsot 1996). Hence, for the combustor, the use of a Large Eddy Simulation (LES) flow solver is desirable (Mahesh et a!. 2001; Constantinescu et a!. 2003). While many design problems of a single flow passage can be addressed by separate computations, only the simultaneous computation of all parts can guarantee the proper prediction of multi-component phenomena, such as compressor/combustor instability and combustor/turbine hot-streak migration. Therefore, a promising strategy to perform full aerothermal simulations of gas-turbine engines is the use of a RANS flow solver for the compressor sections, an LES flow solver for the combustor, and again a RANS flow solver for the turbine section (Fig. 1).
Document Details
- Document Type
- Technical Report
- Publication Date
- Dec 01, 2003
- Accession Number
- ADP014816
Entities
People
- J. U. Schluter