The LANL Source Geometry Experiment,
Abstract
The Source Geometry Experiment was successfully conducted over the time period 17 April to 7 May 95. Recording in the mine was conducted 24 April to 4 May 95. Five single sources were instrumented that included four cylindrical charges at different burdens (distance from the free face) and a pseudo-spherical charge. Nine production shots conducted during the two week visit to the mine were also recorded. Included in these production shots were a number of explosions designed to primarily bulk (no cast) the overburden and a number which cast material into the mine pit. Instrumentation was divided into six primary types: (1) Near-source accelerometers were deployed at distances of approximately 20 to 300 m (14, three-component 25 g/volt accelerometers and 16, three-component 1 g/volt accelerometers); (2) Linear array of velocity gauges to quantify wave propagation effects (4-11 three component strong motion velocity gauges); (3) Far-field velocity gages deployed in an azimuthal array around the mine at ranges from 500 to 2500 m (8, three component velocity gauges); (4) High speed film and multiple camera video designed to quantify the two and three dimensional affects around the explosions (2 high speed cameras and 3 HI-8 video cameras); (5) Velocity of detonation and detonation time measurements of selected explosions (2 VODR systems); and (6) Pre and post shot laser survey. Any one shot had as many as 154 channels of data. Although the complete data set is still being assembled, quality checked and analyzed, it appears that nearly 2,000 channels of data were successfully recovered during the experiment.
Document Details
- Document Type
- Technical Report
- Publication Date
- Aug 14, 1995
- Accession Number
- ADP204485
Entities
People
- B. W. Stump
- C. L. Edwards
- D. C. Pearson
- D. F. Baker
Organizations
- Los Alamos National Laboratory