Safety Orders and Industrial Sanitation during Mechanical Treatment and Use of Aluminum and Titanium Alloys (Pravila Tekhniki Bezopasnosti i Proizvodstvennoy Sanitarii Pri Obrabotke i Primenenii Alyumin'yevykh i Titanovykh Splavov),
Abstract
Metal working machines and equipment, their arrangement and location shall comply with the Safety Orders and Industrial Sanitation for Cold Working of Metals in Machine-Building Industry and with these Orders. Industrial instructions for cutting alloys shall include all requirements for safety operation of the machinery. Water-based emulsions containing mineral and plant oils, as well as their mixtures shall be used as cooling agents during cutting of alloys. Cooling emulsions containing 80% of sulfofrezol, up to 15% of kerosene and up to 5% of oleic acid shall be used for cooling purposes during drilling and deep boring of metal parts. The geometry of cutters, turning conditions and cooling of metal bars shall secure a proper heat dissipation from the cutting zone. The temperature of ships shall not exceed 150-200 C. To eliminate ignition of chips, metal bars shall be fed with a speed not exceeding 0.06 mm per revolution, or with the cutting rate of not more than 100 m/min. A local exhaust shall be installed for the removal of dust, small metal ships and filings.
Document Details
- Document Type
- Technical Report
- Publication Date
- Feb 17, 1977
- Accession Number
- ADA039039
Entities
People
- L. P. Sharikov
Organizations
- Office of Naval Intelligence