Freeform Extrusion of High Solids Loading Ceramic Slurries. Part 1: Extrusion Process Modeling

Abstract

A novel, solid freeform fabrication method has been developed for the manufacture of ceramic-based components in an environmentally friendly fashion. The method is based on the extrusion of ceramic slurries using water as the binding media. Aluminum oxide (Al2O3) is currently being used as the part material and solids loading as high as 60 vol. % has been achieved. This paper describes a novel manufacturing machine that has been developed for the extrusion of high solids loading ceramic slurries. A critical component of the machine is the deposition system, which consists of a syringe, a plunger, a ram actuated by a motor that forces the plunger down to extrude material, and a load cell to measure the extrusion force. An empirical, dynamic model of the ceramic extrusion process, where the input is the commanded ram velocity and the output is the extrusion force, is developed. Several experiments are conducted and curve fitting techniques are utilized to construct the dynamic model. The results demonstrate that the ceramic extrusion process has a very slow dynamic response, as compared to other non-compressible fluids such as water. A substantial amount of variation exists in the ceramic extrusion process, most notably in the transient dynamics, and a constant ram velocity may either produce a relatively constant steady-state extrusion force or it may cause the extrusion force to steadily increase until the ram motor skips. The ceramic extrusion process is also subjected to significant disturbances such as air bubble release, which causes a dramatic decrease in the extrusion force, and nozzle clogging, which causes the extrusion force to slowly increase until the clog is released or the ram motor skips.

Open PDF

Document Details

Document Type
Technical Report
Publication Date
Jul 01, 2006
Accession Number
ADA461293

Entities

People

  • Gregory E Hilmas
  • Michael S. Mason
  • Ming C. Leu
  • Robert G. Landers
  • Tieshu Huang

Tags

Communities of Interest

  • Space

DTIC Thesaurus Topics

  • Air Force
  • Air Force Research Laboratories
  • Brushless Dc Motors
  • Cells
  • Engineering
  • Fabrication
  • Flow
  • Fluid Flow
  • Impact Tests
  • Load Cells
  • Manufacturing
  • Materials
  • Materials Science
  • Selective Laser Sintering
  • Steady State
  • Stepper Motors
  • Three Dimensional

Fields of Study

  • Materials science

Readers

  • Control Systems Engineering.
  • Manufacturing Engineering.
  • Powder metallurgy of Titanium alloys.